Shed clear out - Sydney
I have some parts that I no longer need. I don't know what they are worth so please PM me a sensible offer if you are interested in any of them.
I'm based in the West Ryde area of Sydney though I can send parts anywhere if needed at the buyer's cost.
Let me know if you have any questions.
These are 20mm bump steer spacers for the front of a SW20 MR2.
These are front brake callipers for ST184 and ST185 Celica. I'm 99% sure that these are a direct bolt on to the rear of a SW20 MR2 though you will obviously lose the hand brake. These are much bigger than the stock SW20 rear calliper. I haven't tested them on a SW20 and you may need to adjust your brake bias to use these.
These will of course bolt straight onto a Celica!
This is a used window net. It is a bit old so I wouldn't recommend using it for racing, though it would look cool hung up on the wall of your garage.
This is a Blitz pod and pipe to suit a ST205 GT4 Celica. It may also fit other cars moderately easily.
These are intercooler pipes to suit a GEN 2 3SGTE in a SW20 with stock turbo and inlet manifold. These go with a water to air intercooler mounted in the boot.
These are the side engine covers for a SW20 MR2. The paint is perfect, and is Rossa Corso (Ferrari red). This colour is very close to the MR2 red. For example, my car is Rossa Corso, though my bonnet is MR2 red. Nobody has noticed that they are different...
This is a radiator cooling fan from a ST184 Celica (I think)
This is a box of trim from various ST184 Celicas that I wrecked over the years. This is to be sold all together.
post edited by Bud - 2016/12/27 12:57:04